Phase III Mattress Replacement System PA7900

(Parkhouse)

* 39 stones weight limit

* Very High Risk

* Self regulating technology

* Cell system and cover can be removed and laundered

* Dual tone audible alarms

* Extended length version also available

* Timed static switch

* Auto-lockout function
* Recommended for use in the Acute, Community & Nursing Home sectors
 

Infection Control
 

The multi stretch PU cover is waterproof, vapour permeable and impregnated with Acti-fresh biocide to help prevent the build up of bacteria and ensure it can be easily cleaned to aid disinfection protocols

High frequency welded seams and integral covered hoses reduce the risk of fluid ingress

The entire mattress cell system and cover can be completely removed and laundered up to 80°C to aid decontamination protocols

The simple tactile control panel can be easily wiped clean to ensure there is no harbouring of pathogens unlike traditional dials and switched

Pressure Area Care

Once alternating mode is set, the power unit will automatically self regulate and adjust the internal cell pressure to suit the individual patient weight within the chosen morphology weight range

The three static cells in the head section are designed to accommodate patients who suffer from motion sickness

Ease of Use

The 10 minute start-up static mode allows the carer time to position and prepare the patient on the support surface

Auto lock out function prevents any unauthorised setting changes to the pump unit

Automatic shut off valves in the pump unit prevent the mattress from deflating during power failures allowing the mattress to retain static pressure for up to 24 hours

Easy access and simple to use CPR tag allows rapid deflation of the mattress within 10 seconds to aid emergency procedures

Service and Maintenance

Dual tone audible alarms distinguish between low pressure and power failure to help reduce downtime.

A self diagnostic alarm bypass is incorporated to avoid unnecessary engineer visits

The power unit incorporates circuit breakers as opposed to conventional fuses to minimise disruption due to power surges

Easy access air filters help prolong the life and reliability of the pump unit

Independent cell construction means that all parts i.e. cover, cells, tubing can be replaced to save ongoing maintenance costs

Specifications

Max. Weight Limit:  39 stones / 247.7 kgs

Min. Weight Limit: 4.5 stone / 28.6 kgs

Risk Factor:   Very High Risk

Warranty:   2 years

Cell Design:   20 figure of 8 cells, 3 static head cells

Operating Cycle:  10 minutes

Pressure Range:  30-50mmHg

Mattress Dimensions: (inflated) 190cm x 88cm x 20cm

Mattress Weight:  4 kgs

Power Unit Dimensions: 35cm x 24cm x 12.5cm 

Power Unit Weight: 4 kgs

Electrical
 

Safety Standards:  IEC 601/1 BS5724 Part 1

Voltage:   AC230V 50Hz

Noise Level:    NC30

Power Input:   12w

Fuse:    External

Brochure